Paloma
Paloma 28L External Gas Geyser PH-28CMX
Paloma 28L External Gas Geyser PH-28CMXCouldn't load pickup availability
Sold only with an installation package by The LpGas Man.
The Paloma 28L EcoMax External (PH-28CMX(SA)) is Paloma's commercial continuous-flow gas geyser, also used in medium to large homes. It gives up to 28 litres a minute at a 25°C rise and can heat water to 82°C, which makes it suitable for sanitising. Paloma rates one unit for 2 to 3 bathrooms and 1 to 2 kitchens, depending on the installation.
It is mounted on an outside wall where there is plenty of ventilation, and runs on LPG or natural gas. For bigger demand, two identical units can be joined with the Paloma EZ-Link (up to 56 L/min), or up to 6 units with the Paloma MIC-6 Manifold Controller. Order it on its own, or together with the Paloma Standard Kitchen Controller (cable not included, any standard 2-core speaker cable works). When The LpGas Man installs the controller, it costs R2,500 including the cable and labour.
Features
- 6-star energy rating, 84% thermal efficiency
- Hot water up to 82°C
- Starts at a low flow of just 1.5 L/min
- Paloma Q Function: the temperature holds steady when several taps run at once
- Fully electronic control, with a digital diagnostic display and error code recall
- Solar boost ready
- EZ-Link, MIC-6 and MIC-185 compatible, with Multipak and Tankpak options
- For commercial and domestic use
- Weight 27 kg. Power use 69 W at 240 V, or 170 W at 240 V including the 115 W anti-frost heater
Safety
- Flame Safe® technology that detects heat exchanger faults and shuts the unit down
- Overheat protection
- Current fuse
- Water pressure relief valve
- Anti-frost heater
Specifications
- Model: PH-28CMX(SA) EcoMax
- Use: Commercial, industrial and domestic
- Flow: 28 L/min at a 25°C rise
- Operating flow rate: 1.0 to 34 L/min
- Activation flow rate: 1.5 L/min
- Gas use: 11 to 210 MJ/hour
- Minimum activation water pressure: 120 kPa
- Minimum water pressure for full flow: 600 kPa
- Maximum water pressure input: 1000 kPa
- Gas inlet: R ¾ / 20mm
- Water inlet and outlet: R ¾ / 20 mm
- Temperature range: 37°C to 82°C
- Fixed temperature settings: 40, 42, 45, 50, 55, 60, 70, 75°C
- Temperature controller: Standard Kitchen MC-101, maximum 60°C
- Size: 343 mm wide x 260 mm deep x 529 mm high
- Weight: 27 kg
- Flow and return systems: Can be part of a circulated hot water flow and return system
- Solar: Ready for an in-series solar installation
- EZ-Link: Yes
- MIC-6 and MIC-185: Yes
- Tankpak: Yes, 1 to 10 units
- Multipak: Yes, 2 to 6 units
Installation
- Mounted outdoors on a wall, with plenty of ventilation
- Needs a steady electricity supply while it runs. In a power cut it can run from an inverter or a UPS that is not a square-wave unit
- Must be installed by a registered gas installer, with a Certificate of Conformity, for the warranty to apply
- In commercial systems that need higher temperatures, a temperature controller may not be suitable. Your installer will advise
- Borehole water invalidates the Paloma warranty. Water quality must stay within Paloma's limits (for example pH 6.5 to 8.5 and total hardness up to 200 mg/L).
The LpGas Man can install it and issue the gas Certificate of Conformity. Contact us for a quote.
Warranty
- Domestic use: 10 years on the copper heat exchanger
- Domestic use: 3 years on the gas section and gas parts
- Domestic use: 3 years on all water parts
- Domestic use: 1 year on electrical parts
- Commercial use: 1 year on all parts
Goes well with
Please note: the price shown is for the unit only. It does not include gas, plumbing, electrical work or the materials needed for the installation. Images are used as an example.
Shipping & Returns Policy
Shipping & Returns Policy
Share






🔥 Install your new appliance with us today! 🔥
The new geyser installed at my house is amazing. I can have a hot bath and not worry about not having hot water. Thank you